Andy Rae Archives

I watched Andy's video on oil/varnish/wood filler topcoat.  Could I put this on walnut to which I have applied 3 coats of teak oil?

Andy, At a recent seminar in Richmond, VA you mentioned final dressing of water stones with a ceramic stone. I failed to write down the grit of the ceramic stone.…

Andy; Your response to my request for an expert on the installation of a quartz movement in my tall clock wet astray.  The reply had nothing to do with the…

Andy: I have made a Newport style tall clock.  I didn't want all the traditional works because they are too noisy.  I want to install two separate quarts movements, one…

I'm building two patio chairs that will stay outside so the seats won't be upholstered and I don't want to use cushions for comfort: I want to shape the seat…

What is the best and easiest way to put a crown on a plane blade.  I do not have a grinder. I have tried tilting the blade using my MK-II…

I'm about to rip out all of the door casings (eight doors) and baseboard in my hallway of a one-story ranch house. Over the past few years I have added…

I am making a table top of Pecan and during sanding i have noticed what looks like sticker stains running across a couple of the boards approx 12-14 inches apart.…

Andy,   I am building an entertainment center.  Across the bottom will be 4 drawers. The drawers are around 22"side to side 8" high and 18" deep.  I am going…

Andy, Here are a few pictures of what I'm trying to describe. The U type joint is on the rear leg, and the front leg has a lenghty crack on…